Remote Use
Use the top button on your remote to raise your boat, and the bottom button to lower your boat.
The smaller button below is used for the optional lighting kit. (Part Number 3000.3139)
Light Control Button
Programming
To program your Boat Lift Boss remote control, unplug your unit for
at least 15-20 seconds. Next, while holding down the up or down
button, plug your unit back in. This will allow your Boat Lift Boss to
receive the signal from your remote.
2
If you have any questions regarding this product and its safe use, or if there are any missing or damaged parts, DO NOT return Boat Lift Boss
Call the Boat Lift Boss
120 Volt
Service Department at: 651-357-1862 or e-mail - boatliftboss@extrememax.com
™
OR
12 Volt
Raise Boat
Lower Boat
to the retailer.
™