Handling And Operation; Basic Settings; Setup Menu - Kompernass CR 5 A2 Mode D'emploi Et Consignes De Sécurité

All manuals and user guides at all-guides.com
CAUTION
► In vehicles in which the cigarette lighter also works with the ignition switched off,
the device must be disconnected from the cigarette lighter socket after use .
Otherwise, the vehicle battery may be discharged over a long period of time,
since the device also uses power when it is idle . The vehicle's engine will no
longer start .
► In vehicles in which the cigarette lighter is not switched off, the recording is not
interrupted . In this case, you will need to switch off the camera manually .

Handling and operation

In this chapter you will receive important information for the handling and operation of
the device .
Switching on and off, making settings
Press the on/off
the screen
To switch off the device, press and hold the on/off button

Basic settings

Setup menu

To make the basic settings for the device in the setup menu, press the MENU
button
NOTE
► When calling up the menu, you must first press the ▼ button
selection bar on the first entry .
Then you can use the ▲▼ buttons
entry and then call up this menu item with the
menu item without making a change, press the MODE button
current menu board as well as the total number of menu boards is shown . To close
the menu, press the MENU button
CR 5 A2
button to switch on the device . The camera image is displayed on
. The device is now in video standby mode .
followed by the MODE button . The setup menu opens:
/ to move the selection bar to the desired
/ button
.
for 3 seconds .
Default settings
to place the
. To exit the activated
. Below right, the
GB │ IE │ 37 ■