Unpacking Instruction; Color Temperature - Vonyx RL20 Manuel D'instructions

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
SETTING UP
1. Fixate the conically shaped bottom end of the column tube tightly in the base of the stand.
2. Attach phone holders to the phone stand by tightening the screws, then fixate the phone stand on top of the column
tube. Finally, fixate the ring lamp on top of the phone stand by tightening the mounting screw.
3. When using a microphone: Insert the microphone stand into the microphone clamp before attaching the clamp to the
column tube.
CONTROLS
1. ON/OFF
Press this button to turn on/off the ring lamp lighting.
2.

COLOR TEMPERATURE

Switch color temperatures by pressing this button. Three
options are available: warm, natural and cool. Warm is set
as default temperature.
3. BRIGHTNESS
Press the "+" or "-" buttons to change the brightness of the
emitted light. 10 increments of brightness are available.
3