Safety Instructions - Koenic KFP 500 Mode D'emploi

Safety Instructions

1. Read this user manual thoroughly before
first use and pass it on with the product. Pay
attention to the warnings on the product
and in this user manual. It contains important
information for your safety as well as for the use
and maintenance of the equipment.
2. Never leave the product unsupervised while it is
switched on.
3. Do not place heavy objects on top of the
product.
4. Never immerse electrical parts of the product in
water during cleaning or operation. Never hold
the product under running water.
5. Do not under any circumstances attempt (e.g.
damage in power cord, product is dropped, etc.)
to repair the product yourself. For servicing and
repairs, please consult an authorised service
agent.
6. The mains voltage must match the information
on the rating label of the product.
7. Only unplug from the power socket can separate
the product completely from the mains. Please
be sure that the power plug is in operable
condition.
8. Avoid damages to the power cord that may be
caused by kinks or contact with sharp corners.
9. Keep this product including power cord and
power plug away from all heat sources like
for example, ovens, hot plates and other
heatproducing products/objects.
10. Only unplug from the power socket by the plug
itself. Do not pull on the cord.
11. Unplug the product ...
- when the product is not being used,
- in case of malfunctions,
- before attaching / detaching accessories and
- before cleaning the product.
12. Use this product in dry indoor areas only and
never outdoors.
13. Place the product on a flat, sturdy and
slipresistant surface.
14. Never use, expose or put the product near to:
- direct sunlight and dust;
- fire (fireplace, grill, candles), water (water
splashes, vases, ponds, bath tube) or heavy
moisture.
15. Never pour boiling liquids or very hot food
products into the blender! Allow them to cool
down to a lukewarm temperature.
16. Never operate the product when it is empty.
IM_KFP500_140826_V06_HR.indb 19
All manuals and user guides at all-guides.com
17. Do not hold on to the inside of the blender
18. Do not open the lid when the product is in
19. Never insert any cutlery or stirring objects into
20. Do not allow the product to operate
21. Remove the strainer with the grater from the
22. Make sure that the motor unit and supply cord do
23. Do not operate the product when it is empty in
24. Caution! Do not touch any moving parts while
25. Caution! Be careful when handling the strainer.
26. Use the filling slider only for putting ingredients
27. Do not operate this product if the strainer is
28. This product may only be used if all original parts
during operation. The blades are extremely sharp!
operation. Otherwise food products may fly off
at high speed!
the blender while the product is in operation.
There will be a considerable risk of injury if you
touch any very fast rotating blades!
unsupervised.
product once the motor has come to a complete
stop and the plug has been pulled.
not become wet.
order to prevent damages.
the product is still in operation.
It has sharp cutting teeth.
into the product. Never use your fingers or other
objects.
damaged.
such as the strainer base, strainer with grater,
pulp container, lid with feeding tube and pusher
are used together and are not damaged. Do not
try to replace one part with another. If you have
to replace a part, please contact your authorised
service agent.
English
19
26/8/14 5:05 PM