Ecom SHL 300-Ex Notice D'utilisation page 17

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
Table of Contents
.
Application
2.
Safety instructions
3.
Errors and impermissible loading
4.
Safety regulations
4.
Special requirements for use in potentially explosive areas
4.2
Special requirements for use in dust Ex areas
5.
Safety instructions
6.
Accessories
7.
Ex data
8
Technical data SHL 300-Ex
8.
Technical data
8.2
Technical data charging station
9.
Functional description / operating instructions
9.
Commissioning and general information
9.2
Charging
9.2. Charging Stations
9.2.2 Charging scheme
9.2.3 Fixed installation of the charging station
9.2.4 Vehicle charging station
9.3
Handlamp operation
9.3. Switch-on / operation
9.3.2 Battery power indicator
9.3.3 Pivoting the Handlamp head
9.3.4 Dimmer function and full capacity
9.3.5 Flashing light
9.3.6 Use of colour and diffusing filters
9.3.7 Function scheme during operation
9.4
Safety functions
9.4. Emergency light in operation (emergency operating light)
9.4.2 Emergency lighting, stationary (backup electronics)
9.4.3 LED failure
9.4.4 Exceeding the permissible operating temperature
9.4.5 Scheme of safety functions
9.5
Opening and closing the Handlamp
9.5. Handlamp head
9.5.2 Housing
9.6
LED replacement
9.7
Battery replacement
0.
Repairs
.
Disposal
2.
Cleaning, maintenance and storage
3.
Warranty and liability
4.
EC-type examination certificate
5.
EC declaration of conformity
28
All manuals and user guides at all-guides.com
Note:
29
The latest version of the operating instructions, the EC declaration of Conformity and
29
the Ex certificate are available for download from the relevant product page at
29
www.ecom-ex.com; alternatively they can be requested directly from the manufacturer.
30
3
1. Application
3
The SHL 300-Ex is a robust Handlamp with LED technology designed for industrial and
3
fire-fighting applications in potentially explosive areas of Zones 0 and  or 20 and 2 in
3
accordance with Directive 999/92/EC (ATEX 37).
32
2. Safety instructions
32
32
These operating instructions contain information and safety regulations that must be
33
followed to ensure safe and reliable operation of the unit under the described conditions.
33
Non-observance of these information and instructions may have dangerous conse-
33
quences or may contravene applicable regulations.
33
Please carefully read through these operating instructions before using this unit.
34
36
In cases of doubt (for example, due to translation or printing errors), the German
37
version of these operating instructions shall prevail.
37
39
3. Errors and impermissible loading
39
If there is any risk that the safety of the unit has been compromised, the unit must be
39
taken out of operation and immediately removed from the Ex area.
40
Action must be taken to prevent the torch from being accidentally put into operation
40
again. We recommend sending the unit to the manufacturer for inspection.
40
40
The safety of the unit may be at risk if, for example:
43
- Damage is visible on the housing
44
- The unit has been subjected to excessive loads for which it is not designed
44
- The unit has been improperly stored
44
- The unit has been damaged in transit
45
- Inscriptions or letterings on the unit are illegible or labels are damaged
45
- Malfunctions occur
46
49
We recommend returning the unit to ecom instruments GmbH for service and repair, as
49
original ecom spare parts must be used. The use of third party spare parts from non
49
approved suppliers will invalidate any warranty.
49
50
50
50
50
5
52
54
29

Publicité

Table des Matières
loading

Produits Connexes pour Ecom SHL 300-Ex

Table des Matières