Beamz professional WI-DMX WIRELESS Manuel page 4

FUNCTIONS INTRODUCTIONS
Main Functions

Auto frequency selection.

With receive functions and 16 working frequencies.

Can receive signal wirelessly.
OPERATION INSTRUCTIONS
Comparison between channel and frequency
Channel Frequency
001 2.4330 GHz
002 2.4362 GHz
003 2.4394 GHz
004 2.4426 GHz
005 2.4458 GHz
006 2.4490 GHz
007 2.4522 GHz
008 2.4554 GHz
Operating
Input power 9V DC
The functions of the receiver are adjusted by the "clear" button.
Auto frequency selection
Auto frequency selection
Press the button <AUTO> on the panel of the wireless transmitter the signal of the receiver flashes,
which means the frequencies of the two fixtures have already matched successfully. With memory
save functions of the transmitter, if the matching data is not removed, the two fixtures can match to
work all the time. You do not need to rematch next time.
Cancel matching
Press the button <clear> on the panel of the receiver or the <Auto> button of the receiver until the
signal indicator does not flash, which means the matching data has been cancelled. So the transmitter
can work to match with other receivers.
Match with multiple group
Match a group of receivers and transmitters firstly when you make many groups match to work.
(Disconnect the power supply of others and only keep one group), and then turn on another group,
never power on for matching at the same time. You can power off for the already matched fixtures and
you can also make them not power off.
One transmitter and multiple receivers
Match one transmitter with one receiver firstly and then power off the receiver after matching, match
another receiver with the transmitter, so the transmitter can work with multiple receivers after finishing
matching.
009 2.4586 GHz
010 2.4618 GHz
011 2.4650 GHz
012 2.4682 GHz
013 2.4714 GHz
014 2.4746 GHz
015 2.4778 GHz
016 2.4810 GHz
- 4 -