Samsung HW-NW700 Mode D'emploi page 21

07 CONNECTING THE SOUNDBAR TO AN
SWA-9000S (SOLD SEPARATELY)
Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit
(SWA-9000S - Sold separately) to your Soundbar.
1. Turn off the Soundbar.
2. Connect the wireless dongle to the "WIRELESS" port on the Soundbar main unit.
• When inserting the Wireless Dongle into the Wireless port, make sure that the "WIRELESS"
logo is facing up, as shown in the illustration below.
Use the Holder-Dongle Screw (M3 x L10)
supplied with the HW-NW700.
NOTE
– If you have purchased and want to add an SWA-W700 (optional Subwoofer) to your speaker setup
after adding an SWA-9000S:
– Do not remove the Wireless dongle you have already attached to the Soundbar's "WIRELESS"
port. The Wireless dongle that came with the SWA-9000S can be used with the SWA-W700
(optional Subwoofer).
BYE
ENG - 21
WIRELESS