Barrette SELECT Serie Mode D'emploi page 7

5.
Attach each top rail bracket with four #10 x 2"
screws (Fig. 6). Attach each bottom rail bracket
with four #10 x 1
6.
Pre-drill one
aluminum insert for each side of top rail brackets
only. Fasten with #10 x 1" flat head screws (Fig. 7).
7.
Add two screw covers for both top and bottom
brackets and add two screw caps for each top rail
bracket (Fig. 8).
8.
Repeat installation process for each additional rail
assembly.
⁄ " screws.
1
2
⁄ " diameter hole through top rail and
1
8
Finished Installation
Cover
Cap
Cover
Fig. 6
Fig. 7
Fig. 8
7