Installation Limitations; Door Reversal - Uberhaus JC-128 Manuel De L'utilisateur

English

Installation Limitations

Do not install your
heated e.g. garage
in temperature settings below
a suitable
away from
leveling legs
Door Reversal Instructions
Your is built with a reversible door. You have the
opening it from the left or the right side. In order to reserve the
of your door, please follow these simple
Tilt
the to prevent from falling.
Remove the 3 hexagonal
Remove the pivot holding the bottom of the door.
Separate the door from the
side of the door. Remove and reinstall upper and lower axle door inserts
opposite side.
4. Install the pivot axle to the opposite side.
5. the door to the
6. the base
Install the bottom pivot aligning with the lower pivot insert on the door.
the 3 hexagonal
8. Remove tape.
9. As the unit was tilted, wait
5
any
Your
for the
sunlight or heat
Any floor unevenness should be
at the bottom.
the rear from sliding. Tape
from base
and remove the pivot axle from the
and
to the opposite side
to base
hours before plugging it in.
not properly insulated
was not designed to
on a hard, even
e.g. radiators, baseboard heaters,
with tape.
with the
either