Setting On Screen Display; Status Display Of Disc; Dynamic Range Control - Memorex Disney ELECTRONICS DVD2100-C Manuel D'instructions

Setting on screen display

On screen display can be switched on or off when you
press the Display button.
1
Press Setup in the stop mode.
Press or to select "Picture".
2
Press or Enter, then
press or to select
"Display".
Press or Enter to select
3
"On" or "Off".
On: On screen displays appears when you press any
buttons (factory setting).
Off: On screen displays do not appear when you press
any buttons except Setup, Play Mode, Marker
and Display.
4
To make SETUP screen disappear, press Setup.

Status display of disc

Each press of Display, the status display of the disc will
appear on the screen and change as follows.
DVD
00:34:56 01:12:33
To make status display disappear, press Display again.
AUDIO CD
34:56
Track 11/99
When you playback the CD disc, the status display will
appear on the screen and continue displaying.
2D81221A[E] (27-BACK)
Language Picture Parental
Language Picture Sound Parental
Tv Screen 4:3
Display Off
/Enter/Setup/Return
00:34:56 01:12:33
Title 1/99 Chapter 1/999
1/8 Eng DolbyDigital
1/32 Eng
71:33
29

Dynamic Range Control

DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound
for your equipment.
1
Press Setup in the stop mode.
Press or to select "Sound".
Other
Other
2
Press or Enter to
select "DRC".
3
Press or Enter, then
press or to select
desired setting.
Max: Full dynamic range is increased.
Std: Full dynamic range is maintained.
Min: Dynamic range is reduced.
NOTES:
• This function works only during playback of Dolby Digital
recorded discs.
• The level of Dynamic Range Reduction may differ
depending on DVD video disc.
1/9
7/2/04, 9:28 AM
Language Picture Sound Parental Other
DRC Std Max
Std
Min
/Enter/Setup/Return
29