Voice Dialing - Wagan Tech 2589 Guide D'utilisation

PAIRING WITH A BLUETooTH ENABLEd dEVIcE
1. To set up a connection between the handsfree device and a mobile
phone with Bluetooth technology, storing the device's ID, make sure the
device is powered off, then press and hold the "SEND/TALK" key for
5 seconds to enter pairing mode. The blue LED and red LED will flash
alternately, and "PAIR ON" will be displayed on the mirror.
2. Set the mobile phone to search for Bluetooth devices. Please refer to the
mobile phone user manual for instructions. After searching is complete,
the phone will display all Bluetooth enabled devices detected.
3. From the mobile phone menu, select "WINS" in the device list.
4. To confirm the device, input the pass code "0000". The device ID will
be stored into the mobile phone. "PAIR SUCCESS" will be displayed on
mirror when paired successfully.
5. Some mobile phones can connect to the device automatically after a
successful pairing. "MB CONNECTED" will be displayed on the mirror
and the blue LED light will turn on.
. If the mobile was not automatically connected after pairing, quickly tap
the "SEND/TALK" button and the handsfree device will try to connect to
the mobile phone. "MB CONNECTED" will be displayed on the mirror
and the blue LED light will turn on.

VoIcE dIALING

1. Make sure the mobile phone has connected to the handsfree device. The
blue LED will flash. "VOICE DIAL" will be displayed on the mirror.
2. Quickly tap the "SEND/TALK" key once. The device will issue a voice
dial prompt from the mobile phone.
3. Speak the desired prerecorded voice tag. The mobile phone will dial the
number and "CALL OUT" will be displayed on the mirror.
Wagan and wagan.com are trademarks used by Wagan Corporation.
All manuals and user guides at all-guides.com
User's Manual—Please read before using this equipment
©2009 Wagan Corporation. All Rights Reserved.
5