Cleaning Steps - Argo NARCISO baby 10 Notice D'utilisation

MAINTENANCE
Please make sure the dehumidifier is unplugged before serving or
cleaning the machine, for safety reasons!
1) Clean the Shell：
A. Wipe the shell using soft cloth and eventually mild detergent.
B. Do not wash the machine with a hose, it will cause leakage of electricity.
2) Clean the Air Filter：
The propose of the air filter is to filter the dust or unclean material in the air.
If the filter is blocked by the dust the usage of the electricity will be greater
than normal. For the best more efficient of removing moisture, please clean
the filter once in two weeks.
● Cleaning Steps：
A. Pull out the filter gently.
B. Clean the filter by vacuum cleaner or washing with clean water then
dry the filter using dry cloth.
C. Place the filter back to it's position.
TROUBLESHOOTING
In case your dehumidifier shows any abnormality, please check the items mentioned below at first:
Problem
Both fan and compressor
not working
Compressor or fan not
working
Not collecting water
Noisy unit
Condenser is frozen
Loss of water
Other failure
All manuals and user guides at all-guides.com
Possible cause
No power to unit
Motor failure
In "3 min lag delay" period
Faulty electronics
Air intake filter blocked.
Refrigerant is low.
Temperature and humidity are too low.
Floor is uneven.
Filter is dirty.
Temperature is too low.
Tank not installed properly.
Micro-switch failure.
Unit has frozen.
Return to supplier for service.
Check power to socket
Check power switched on
Return for service
Wait
Return for service
Clean filter
Return for service
Normal operation
Place on a level surface
Clean filter
Switch off and wait for temperature arising
Fit the tank properly
Return for service
Unplug and allow ice to melt
-5-
Solution