Tare Function; Change Weight Unit - Wilfa KS1B-T2 Instructions

FULL DISPLAY LAYOUT
TURN ON SCALE
• Make sure the power switch on the back is set to on position.
• Then short press the power button on the display to turn the scale on.
• The timer and scale button fades in, and the scale is ready to use.

TARE FUNCTION

• The scale tares automatically when it starts.
• Place the coffee container on top of the scale, press the scale button to tare
the weight of the container, and the scale will show 0.0g/oz. The scale is now
ready to measure any additional weight.
• Remember to use the heat resistant silicon pad if you are brewing or
weighing any hot liquids.

CHANGE WEIGHT UNIT

Long press the scale button for 3 seconds to switch between grams (g) and
ounces (oz).
TIMER
• The timer does not show when starting the scale. Short press the clock-
button to show the timer.
• Short press the clock-button again to start the timer. To pause the timer,
short press the clock-button and the time will freeze.
• To reset the timer long press the button for 1 second.
AUTO OFF
If you stop adding weight to the scale, it will automatically shut off after 10
minutes.
PRECISION SCALE · KS1B-T2
7
EN