Fan Speeds; Normal Mode; Sleep Mode - ALPATEC VLP 4005 VSIT Mode D'emploi

All manuals and user guides at all-guides.com
notice_VLP4005_VSIT-reso

FAN SPEEDS

Press "M/Vitesse" touch (B) to start the appliance.
Press again this touch to adjust the fan speeds, as show :
The appliance start automatically on normal mode with low fan speed.
Start low speed
MODE
To select the running mode, press "mode" touch (C) : press on time to select normal mode, two time to
select natural mode and three time to select the sleep mode.

Normal mode

natural mode
NORMAL MODE :
The fan speed is continuous.
NATURAL MODE :
The fan speed will change automatically from high speed to medium speed to low speed to stop and so
on if you have selected high speed.
If you have selected medium speed, it will be the same without high speed steps.
If you have selected low speed, it will be the same as medium but mostly with low speed.

SLEEP MODE :

This mode uses the NATURAL mode.
If you select SLEEP mode and high speed, it works 30' like NATURAL mode and high speed, then 30' like
NATURAL mode and medium speed and then it works like NATURAL mode and low speed.
If you select SLEEP mode and medium speed, it works 30' like NATURAL mode and medium speed and
then it works like NATURAL mode and low speed.
If you select SLEEP mode and low speed, it works like NATURAL mode and low speed.
To stop automatically, use the timer.
SWING
Press "OSC." touch to activate or not the swing function. The appliance is equipped with an horizontal
swing and helicoidally swing. Press "OSC." touch to select the swing :
- Horizontal swing
2/01/06 14:49 Page 10
middle speed high speed
sleep mode
helicoidally swing no swing
10