SC iStick Tria Manuel De L'utilisateur page 63

All manuals and user guides at all-guides.com
61
SC iStick Tria – Using the Device
Setting the Preheat Function
Press and hold the Fire and Up buttons simultaneously while the power is off, until the M1 mode appears� After
pressing the Fire button 3 times, POWER will appear on the display� Press the setting button "Up" or "Down" to
specify the wattage to which the vaporizer head should be preheated� Press the Fire button again� TIME will appear
on the display� Press the setting button "Up" or "Down" to set the desired preheating time in seconds or to switch
off the preheating function�
Upload Individual Logos
Download the file from the official website (http://www�eleafworld�com/download/)� Connect the device to the compu-
ter using the USB cable and double-click the file EleafUpdate�exe� Then click on "Logo" and upload your desired photo�
Press the Fire button two times quickly and press the "Up" or "Down" button to activate or deactivate the logo�
Note: Use an image in bmp format with a maximum of 96 x 32 pixels� If the individual logo cannot be uploaded and
the device switches itself off, press the "Down" button once to restart the device�
Mobile Phone Charging
Screw the RC adapter (not included in the package) onto the device and connect it to a mobile phone using a USB
cable� When the power is on, press the Fire button once to start charging the phone�