K8-Esb Product Manual Section; Rear Panel Description; Front Panel Description - KLEIN+HUMMEL K8-AI8 Manuel Utilisateur

K8-ESB Product Manual Section

Rear Panel Description

Max. Power Consumption 20Watts
AC IN: 100-240V AC, 50-60Hz
RS 485 RS 485 Remote control connector for PC or external control system connection.
RS 485 RS 485
CONFIG CONFIG The first three DIP switch positions are used to terminate the device when only one
CONFIG CONFIG
of the two output ports are being used. The device is terminated when the switch is
set to ON. Switches 1,2, 3 must be set the same way, either to ON or OFF!
th
The 4
16 channels.
K8 OUT 1 and 2 K8 OUT K8 OUT K8 OUT 1 and 2 1 and 2 1 and 2 K8 digital audio bus outputs. Each one contains the same audio and control data and
each one is capable of driving a 200 meter line. When only one output is used the
termination switch must be set to ON.
Sync LED Sync LED Sync LED Sync LED The Sync light glows when an EtherSound network is connected and locked.
Wink LED Wink LED Wink LED Wink LED Light blinks when turned on by remote control software. This light may be used to
confirm that a device is being remote controlled.
EtherSound IN EtherSound IN EtherSound IN EtherSound IN Used to connect to an upstream device of an EtherSound network according the
EtherSound standards.
EtherSound OUT EtherSound OUT EtherSound OUT EtherSound OUT Used to connect to a downstream device of an EtherSound network according the
EtherSound standards.
EtherSound Link LED Indicates that a valid EtherSound device is connected to the K8-ESB and is EtherSound Link LED
EtherSound Link LED EtherSound Link LED
synchronized.
EtherSound Activity EtherSound Activity EtherSound Activity EtherSound Activity Indicates communication activity to the connected EtherSound device.
LED LED LED LED

Front Panel Description

POWER
Power LED Power LED Power LED Power LED The Power LED is illuminated when the device is plugged in and the rear power
switch is turned on.
Page 20
All manuals and user guides at all-guides.com
RS 485
1 K8 OUT 2
CONFIG
S
W
Made in Germany
K8 K8- - - - ESB Rear Panel ESB Rear Panel
K8 K8 ESB Rear Panel ESB Rear Panel
DIP switch selects between 8 and 16 channel mode. ON is 8 channels. OFF is
K8 DIGITAL AUDIO DISTRIBUTION
ETHERSOUND BREAKOUT
K8 K8- - - - ESB Front Panel K8 K8 ESB Front Panel ESB Front Panel ESB Front Panel
EtherSound Network
IN OUT
Link
Activity
K8- ESB
K8 Rackmount Family User Manual