Albrecht DV 100 WP Manuel page 13

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

not longer than 24 hours. This way you are ensuring the best performance
in the future.
B) You can charge the device via the USB cable we are providing, or with a
USB compatible AC adaptor. Usually it needs 1.5-2 hours to be charged
completely.
C) When recharging, both red and green LED indicators are bright. When
finished, the green LED indicator is still bright while the red one goes off.
D) If the device has not been used for a long time, we suggest you recharge
the battery first before you use it again.
E) It is better to charge the battery in power - off mode for fast recharge and
best protection of the device.
PC/Laptop connection
A) System Requirement
1. CPU must be at least 1GHz or above
2. Operating system: Windows 98 / ME / XP / 2000 / Vista / 7 / Mac OS X 10.5
or higher
3. USB 2.0 slot
4. Minimum 512MB memory
B) Connecting PC or Laptop
1. Unscrew the lid, plug the USB cable into the device and connect it to the
PC or Laptop.
2. The computer will recognize the device as a new added disk. A new
window will pop up, where you can find a folder. There the video files you
recorded are located.
3. Copy and save the video files to your computer.
4. When finished, click the disk icon to safely remove your hardware, then pull
out the USB cable.
Operation
A) Switch on/ Recording
1. Switch On:
Press On/Off/Record button for about 1 second,
then both the green and the blue LED indicators turn on, the device is
started. First it will start an initialization procedure for about 3-4 seconds.
2. Recording:
After 3-4 seconds initialization procedure, the green LED indicator flashes
for one time and the device starts to record, after that the blue LED
indicator flashes every second.
B) Stop recording / Save / Switch off:
During recording, press the On/Off/Record button for 2-3 seconds, both the
green and blue LED indicators turn off and the device switches off. During the
2-3 seconds button press time, the device will execute 3 commands: Stop
recording, Saving, Switching off. For the saving operation the camera will
manage the memory automatically. If all memory space is taken the camera will
delete the oldest movie to create some free disk space. So please make sure
that you copy the movies you don´t want to lose to your computer in due time.

Publicité

Table des Matières
loading

Table des Matières