Protection Against Overheating - Koenic KHD 221 Mode D'emploi

Cleaning the air inlet grille
Clean the air inlet grille regularly to remove hair
and lint. Push in direction of arrow (left and right
side), then slide it out from the hair Dryer.
Ensure that the air inlet grille is locked again
securely after cleaning.

Protection against overheating

1. If the hair dryer becomes too hot, then it
will switch itself off automatically.
2. Unplug the power plug from the power
outlet and allow the product to cool down
completely before you use it again.
3. Check to see if the air inlet opening is dirty,
and clean it according to cleaning the air
inlet grille.
Cleaning and care
1. Warning! Unplug the product and let it cool
down completely before cleaning. Never
immerse electrical parts of the product in
water during cleaning or operation. Never hold
the product under running water.
2. Warning! When cleaning, never use solvents
or abrasive materials, hard brushes, metallic or
sharp objects.
3. Clean the product' s exterior surfaces with
a slightly damp cloth and then dry them
thoroughly.
4. Make sure that no water enters the product
interior (for example, through the switch).
Do not dispose of this product as
unsorted municipal waste. Return it
to a designated collection point for
the recycling of WEEE. By doing so, you will
help to conserve resources and protect the
environment. Contact your retailer or local
authorities for more information.
KHD221_A5_131003.indb 17
All manuals and user guides at all-guides.com
English
17
3/10/13 12:14 PM