Hercules DJControl Starlight Comment Utiliser page 6

How to use
Hercules DJControl Starlight
7. Place Cue points and Hot Cues in Serato DJ Lite
EXPLANATIONS
Cue points and Hot Cues are bookmarks inside a track:
▪
Cue In = the moment to start playback of a track,
often on the first beat. In Serato DJ Lite, this is
indicated by a white arrow.
▪
Hot Cue = moments of specific importance for
the DJ, accessible by pressing the Hot Cue pads
on the DJControl Starlight controller.
▪
Serato DJ Lite manages up to 4 Hot Cues.
Hot Cue 1: Hot Cue 2:
red orange
8. Make the beats flash on the backlit base
SET THE LIGHTING MODE IN
SERATO DJ LITE
Choose a lighting mode from the 7 different modes
available:
▪
Click the Settings button (with a gear-shaped icon)
in the top bar of Serato DJ Lite.
▪
Go to the Mixer tab.
▪
In the Lighting Control field, select Beat Flash.
Hot Cue 3: Hot Cue 4:
blue yellow
ACTIONS
▪
Press the CUE button on DJControl Starlight to
place a Cue In, or to go to the Cue In point.
▪
Enable HOT CUE mode, and press pads 1 to 4 to
set Hot Cue 1 to Hot Cue 4.
▪
To move the Cue In point: pause playback of the
track, move to where you want to place the Cue
In point, and press the CUE button.
▪
To delete a Hot Cue, press the SHIFT button on
DJControl Starlight plus a pad.
ON DJCONTROL STARLIGHT
▪
Play a track.
▪
The backlight on the DJControl Starlight's base
flashes to the beat of the track, to help you learn
to mix and make it easy to count the beats from 1
to 4:
▪
Beat 1 = red / Beats 2, 3, 4: blue
6