Uberhaus 38115198 Guide De L'utilisateur page 9

Fig. 12: Attach top short beam 1 / top short beam 2 (L1/L2) to slanted beam (K1) with screws (FF) and washers (BB); attach
top middle beam 1/ top middle beam 2 (M1/M2) to slanted beam (K1) & middle beam (K2) with screws (FF) and washers
(BB) as shown.
Fig. 13: Attach top long beam 1/ top long beam 2 (N1 /N2) to middle beam (K2) with screws (FF) and washers (BB).
Fig. 14: Attach top long beam 1/ top long beam 2 (N1 /N2) to slanted beam (K1) with screws (FF) and washers (BB).
Fig. 15: Place big top cover (O) onto top connector (J) and then screw hook (P) to big top cover (O); do not fully tighten bolts
at this stage.
Hardware pack 3
Part
BB
FF
II
JJ
GG
All manuals and user guides at all-guides.com
Description
M6 Washer
M6X15 Screw SM06015C
M6X40 Screw SM06040C
Φ8*260mm Stake
DD08260C
Ring
Part No Quantity
UD06C 56
48
8
16
R40W 48
Image