Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
•
•
SETTING THE LIGHT INTENSITY
OF THE LCD SCREEN
•
SETTING THE ALARM
•
•
•
•
•
6
/ 84
E-IM-WakeUpLight-002.indd 6
EN
FR NL DE ES IT PL CS SK HU SL BG SV LT
To navigate more quickly between the hours and
minutes, press and hold the "+" or "-" button
and
.
(5)
(7)
Press the set button
to confirm the time.
(10)
The format button
allows you to choose
(13)
either a 24-hour or a 12-hour display
format. If you select the 12-hour format,
the control screen will show the time of
day as either "AM" or "PM"
(17 and 18)
If the hour symbol stops flashing
before you have set the time, simply
press the set button
once.
(10)
You have a choice of two light intensities for the
display screen. Press the light button for the dis-
play screen
repeatedly to select or deactivate
(14)
the light intensity.
You can set two different alarm times (alarm 1
and alarm 2) on the Wake Up Light.
To set the alarm 1 or 2, press and hold the alarm
1 button
or alarm 2 button
for 3 seconds.
(9)
(8)
The symbol for the wake-up alarm 1 or 2
will then appear on the display screen.
The hours display for the alarm will start to flash.
Use the "+" and "-" buttons
and
(5)
the alarm time. Then press the set button
minutes display will start to flash.
Wake Up Light EN Instruction manual
•
To set the minutes, press the "+" and "-" buttons
and
. To navigate more quickly between the
(5)
(7)
hours and minutes, press and hold the "+" or "-"
button
and
(5)
CHOOSING THE ALARM SOUND
•
You can choose between 6 sounds from the world
of nature or FM radio.
•
Press the melody setting button
.
wake-up alarm 1 symbol
want to set a sound alert for the alarm 2, press
the "+" and "-" buttons
•
Press the melody setting button
time. You can then select your preferred natural
sound by pressing the "+" and "-" buttons
repeatedly. The numbers 1 to 6 are natural
(7)
sounds and number 7 is FM radio.
•
Press the melody setting button
confirm your choice.
•
To adjust the volume of the alarm, press the
volume button repeatedly until you reach the
desired level (1 to 15).
If the FM radio is on when the wake-up
alarm is due to go off, the radio will stop at
the alarm time to allow the natural sound
to play for 2 minutes, after which the radio
(21 or 22)
will automatically come back on again.
SWITCHING OFF THE ALARM
to select
•
When the alarm goes off, you can deactivate it
(7)
. The
by pressing any button, with the exception of
(10)
the snooze button
deactivated until the programmed wake-up time
the following morning.
.
(7)
once. The
(12)
will flash. If you
(21)
and
.
(5)
(7)
a second
(12)
and
(5)
again to
(12)
. The alarm will then be
(1)
21/11/2017 09:12:01
Publicité
Table des Matières
