Inseego FG2000 Guide De Démarrage Rapide page 4

English
Setting Up Your
Step One: Install the SIM Card and Batteries
• Remove the cover from the SIM slot on the right side of the device.
• Use the provided SIM tool to insert a Nano
4FF SIM card into the appropriate SIM slot
and reattach the cover.
NOTE: If necessary, remove the SIM from its protective sleeve, being
careful not to touch the gold-colored contact points. Insert the SIM
card notch first, with the contact points facing the back of the device.
• On the bottom of the device, slide the battery cover to the left and
insert a fingernail at the edge to lift it out of place.
• Insert three AA batteries and replace the cover.
• Press the Power button to turn the FG2000 on for the next step.
Step Two: Identify a Location for your FG2000
• Scan the QR code to download the Inseego Mobile App
from AppStore or Google Play , or visit https://inseego.com/
inseego-connect-get-app to download the App.
• Follow instructions within the Inseego Mobile App to connect to the
FG2000 and perform a location survey to identify the ideal location
for your FG2000.
NOTE: Make sure to place your FG2000 on a sturdy surface.
FG2000
This device supports only Nano SIM cards.