On, Off And Standby - Audiophony PA WALLAMPpad Guide De L'utilisateur

WALLAMpad - Touchscreen wall amplifier 2 x 20W SD/BT/AUX / DLNA /Airplay & Application

4 - On, off and standby

- Power On : Push the switch to the left.
- Power Off : Push the switch to the right.
Caution : Turning off the player via the power button is an abnormal operation. The file system
could be damaged after too much power down via this button. The power should only be turned off
occasionally.
To turn off the player it is recommended to use the On/Off button.
- Turning on the player : Make sure the amplifier is powered on, then press and hold the On/Off
button located on the top right of the box. The player's home screen appears within 5 seconds.
- Turning off the player : Press and hold the On/Off button. A dialog box then asks you to confirm
the shutdown, the player will shut down after 5 seconds.
On
Off
On/Off button
English