König HAV-BTAL100 Mode D'emploi page 5

B. Play music
1. Function selection: Press "MODE" and 5 working statuses are available:
SD card, USB, AUX, FM radio and Bluetooth®.
2. Insert an SD card or USB flash drive. Press < /– or +/ > to select the music.
Press and hold < /– or +/ > to adjust the volume. Press
In any state SD card or USB flash drive will be given priority and can be
plugged and played instantly.
3. AUX: Use the audio cable (3.5 mm jack) to connect a PC or music player to
the speaker. Press and hold < /– or +/ > to adjust volume.
4. FM: Press and hold
select channel and press < /– or +/ > to fine-tune the channels.
5. Bluetooth®: Press MODE and select BLUE. After you did hear a sound
from the speaker it will search for devices with Bluetooth® technology for
30 seconds. If connected before, the speaker will automatically connect
to the last device again. If the speaker cannot find any already connected
devices it will search again for 30 seconds to find a new device. When the
speaker (HAV-BTAL100) is found, connect it to the device; if a password is
required, press "0000". When the speaker is paired with the device, you can
hear dual-beep sound.
(Note: If connection fails, please shut down the speaker and try again)
to search for channels automatically. Press
5
ENGLISH
to pause or play.
to