Device Description
> Wash LED IP65 projector for outdoor use
> LED Type: 54pcs ×5W RGB 3in1 super bright LED
> Drive Current: 300mA
> Lifetime: About 50000 hours
> Channel mode: 5 kinds control channels modes. STAG mode, ARC3, AR3.d, AR3.S, 3CH mode can be
chosen (9CH/4CH/5CH/6CH/3CH)
> Smooth color mix with the latest reflective cup
> Strobe effect with variable speed
> Dimmer (0-100%) with 9 different curves
> Clear display for control panel
> Powercon power supply connectors IN an OUT
> Power supply:
110V- 250V / 50-60Hz
> Power consumption: 270W max
> Temperature Protection: 65℃
> Surface Treatment: Aluminium
> Auto effect: 5 kinds dynamic effects
> Dimming mode: Dimmer 0 means fast linear dimming. Dimmer 1~8 stands for soft non-linear
dimming.
> Dimensions 360 x 221 x 266mm
> NW : 8.8 kg
Installation
o Rigging
The installation of the projector has to be built and constructed in a way that it can hold 10 times the
weight for 1 hour without any harming deformation.
IMPORTANT!OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including calculating working
load limits, installation material being used, and periodic safety inspection of all installation material
and the projector. If you lack these qualifications, do not attempt the installation yourself, but instead
use a professional structural rigger. Improper installation can result in bodily injury and or damage to
property. The projector had to be installed out of the reach of people
Always secure your fixture with a safety cable!
o DMX 512 Connection
The wires must not come into contact with each other, otherwise the fixture will not work at all or
properly. Please note the starting address depends upon which controller is being used. Only use a
ArchiTECH 270 Manual Ver. 1.00
All manuals and user guides at all-guides.com
12
Page