MF1W
Setting the temperature
You can set the temperature between +5 °C and +20 °C.
I
NOTE
The cooling capacity is influenced by the ambient temperature.
➤ Press the "TEMP –" (fig. 2 5, page 3) button to decrease the desired
cooling temperature by 1°C , or press the "TEMP +" (fig. 2 7, page 3)
button to increase the desired cooling temperature by 1 °C.
✓ The cooling temperature in °C that you just set flashes in the display for
few seconds. Then the current cooling temperature is displayed again.
Switching the appliance off
➤ To end the cooling process, press the "POWER" button (fig. 2 6,
page 3).
✓ The display switches off, and the bottle ceases to be cooled.
6.3
Inserting/replacing the rechargeable battery pack
MyFridge MF1W is powered by a battery pack which can be inserted into the
device and charged there.
!
CAUTION! Danger of short circuiting!
Never allow electrically-conductive parts to come into contact with
the two metal contacts of the battery pack.
➤ Take the rechargeable battery pack (fig. 2 4, page 3) out of the device if
necessary.
I
NOTE
Use only the rechargeable battery pack supplied by the manufac-
turer. Do not open the rechargeable battery pack. A rechargeable
battery pack can be obtained from your dealer.
➤ Insert the rechargeable battery pack, contact springs first, into the device
until it snaps in audibly.
EN
All manuals and user guides at all-guides.com
Operation
21