Video Settings; Audio Settings; Service Configuration - Alcad STB-040 Manuel

TV
The section allows configuration of technical values about TV reception.

• Video Settings

◦ TV Standard: PAL / NTSC
◦ HD Standard: HD resolution.
◦ IPTV Switch Mode: IPTV Switching mode
◦ Video Scale: Converts a resolution to another
◦ Watchdog: Enabled.

• Audio Settings

◦ SPDIF audio format: Sony/Philips Digital Interface Format
◦ HDMI audio format: HDMI audio format
◦ AC3 License: Enable AC3 license (enabled by default).
• TV Settings
◦ TV Control Protocol: The protocol used to communicate with the TV.
◦ Reload with Home key: behaviour of the HOME key on the Remote Control.

Service configuration

There are three sources of services (Service Source):
• Interactive STB: STB default. Setting used with the ALCAD IPTV Server Solution. Services are configured in the
IPTV ALCAD manager.
• STB noninteractive SAP: Receive the assigned address (224.2.127.254:9875 default address in the IP receptor)
the list of services TV / Radio. This IP address can be configured by the user accessing the Services screen, select
"STB noninteractive - SAP" SAP URL field.
• STB noninteractive Fixed: Permits manual set up of the multicast addresses for TV / Radio services. This requires
manually entering these addresses in the Services screen, select "STB noninteractive. - Fixed"
EN
Fig. 17 – TV menu.
ALCAD STB-040 Manual - 33