Wiko BUDS IMMERSION Guide Utilisateur page 8

LET'S GET STARTED...
1. Power on / power off
Open the charging box, your earbuds will power on
automatically. When you put back the earbuds into the
charging box and close it, they will power off automatically.
In case of problem, long press for 4 seconds on both
earbuds to power them on and 10 seconds to power them
off manually.
~ Note: charge the earbuds for minimum 10 minutes
before first use.
2. Bluetooth® Pairing
~ Automatic pairing
Power on your earbuds and search for WIKO BUDS
IMMERSION into your smartphone Bluetooth® list to
pair them.
~ Manual pairing
Put your earbuds into the charging box (lid open), then
long press for 10 seconds onto the multi-fonction button
to pair them successfully.
~ Pair to another device
Press for 3 seconds onto the multi-fonction button to see
your earbuds into the Bluetooth® list of another device.
3. Connect / disconnect
Once paired, earbuds will automatically be connected to
your device when charging box is opened, and they will
be disconnected when place back into the charging box.
~ Note: if the distance between the earbuds and the mobile
phone exceeds the range of Bluetooth® signal, they will be
disconnected. Automatic reconnection will occur within 3
minutes when back in the connection area.
4. Factory settings
Press and hold the multi-fonction button for 10 seconds
to clear the earbuds' pairing history and restore factory
settings (put them into charging box with lid open).
ENJOY YOUR EARBUDS
1. Music
Play/pause music: tap twice the left earbud.
Play the next song: tap twice the right earbud.
2. Voice assistant
Long press left earbud for 2 seconds.
~ Note: accept voice assistant function in settings.
3. Calls
Answer/hang up a call: tap once on any earbud when
calling.
4. Active Noise Cancelling mode
Switch between ON and Transparency mode: long press
the right earbud for 2 seconds.
In ON mode, the Active Noise Cancelling function can
reduce, but not eliminate, low-frequency noise.
If you feel that the noise reduction function isn't working
for you, select some appropriate ear-tips to improve your
experience.
In transparency mode, your Wiko Buds Immersion collect
external sounds, improving your ability to perceive and
communicate with your surroundings without taking
them off.
WIKO CONNECT APP
You can download Wiko Connect App to install firmware
updates and additional features for your Wiko Buds
Immersion. Search for it on Google Play store or scan the
QR code below.
Wiko Connect App is only available for Android devices.
EN