Intended Use; Safety And Installation Instructions; Scope Of Delivery - Dometic PERFECTVIEW SPK 150 Instructions De Montage

All manuals and user guides at all-guides.com
SPK150, SPK160, SPK170
The following instructions must be observed during the installation of
the cable set. The cable set may only be mounted for the installation of
accessories in heavy goods vehicles.

Intended use

The spiral cable is required to connect the camera and monitor when installing the
RVS reversing video system, with date of manufacture as of January 2010, in a truck-
trailer combination with a towing vehicle and trailer:
9600000209 SPK150 is compatible with RV-500SPK
9600000220 SPK160 is compatible with RV-100SPK
9600000235 SPK170 is compatible with CAM44 and CAM604
The cable set has been designed for the requirements of commercial use. The instal-
lation sockets are supplied ready for connection and enable easy final mounting on
the vehicle.

Safety and installation instructions

This documentation contains mounting instructions. The manufacturer will not
accept any warranty for damages resulting from incorrect installation.
When installing the spiral cable, note the following:
Use the drilling template supplied to mark the mounting position of the sockets
(fig. 1, page 2).
Always install the DIN plug connection with the socket contacts towards the
camera, i.e. on the trailer.
Choose the installation position for the socket so that the required cable length
does not exceed the total length of the connection cable. Remember that a
different cable length is required when travelling around bends or tipping the
trailer.

Scope of delivery

Description
Sockets for towing vehicle
Sockets for the trailer
7-pin spiral cable
EN
SPK150 SPK160
9102200065 9102200087
9102200064 9102200086
15400051 15400051
SPK170
9102200172
9102200173
3