X4-Life 701445 Mode D'emploi page 3

EN | 3 in 1 motion detector
with emergency lamp
We are pleased that you have decided to buy our product and wish you
an enjoyable and successful use.
Information on this user manual
This user manual contains important information for the safe use of the
product. Therefore, for your own safety and for a successful use, please
read this user manual completely before assembling and using the
product. Please keep this operating manual for reference. If you pass
on the product to anyone else, please hand over the operating manual
as well.
Designated use
This product is not suitable as household lighting or for commercial use.
The designated use is defined by the instruction manual and in
following the appliance and the warnings mentioned in this user
manual. The „3 in 1 motion detector with emergency lamp" serves as
security lamp, night light and LED flashlight. Due to integrated batteries
usage is also possible during a power failure. The device is restricted
to indoor use. This device is only designed for your personal safety and
convenience not for commercial or industrial use.
Liability
We do not accept liability for any damage to property or for personal
injury that is due to improper use or failure to follow the instructions
in this operating manual and the safety advice. In such cases any claim
under the guarantee is null and void!
Service adress
lived non food GmbH
Friedrich-Seele-Straße 20
D-38122 Braunschweig
Telefon: +49 (0) 531 224356-82
E-Mail: service@x4-life.de
Internet: www.x4-life.de
Specifications
Input voltage power supply
Battery emergency lamp
Emergency lamp weight
Power supply weight
Number of LEDs
Dim. (W x H x D) emergency lamp 10,8 cm x 6,0 cm x 4,6 cm
Dim. (W x H x D) power supply
Scope of delivery
Emergency lamp | Power Supply | 3x AA batteries | Manual
General notes
All mentioned company and product names are registered trademarks
under the rights of their owners. © All rights reserved.
No liabilities will be taken for damages or claims resulting out of
not reading and/or not following the user guide and/or any form
of modification on or in the product. Under these circumstances,
no warranty services will be given. Liability cannot be taken for
consequential damages.
The contents of this user manual may differ from the product. If so,
please consult additional manuals in the packing. Keep this user manual
in a safe place. If you give this product away to a third party, make sure
that you also pass on the user manual.
For the reason of safety and CE-licensing it is not allowed to modify this
unit in any way and/or use it for functions, other than the designated
use.
Safety guide
Please read the safety guide before using the product. This information
is for your safety and the protection of the device and devices
connected. You will also find specific safety instructions in the following
chapters of this user manual.
Manufacturer adress
lived non food GmbH
Friedrich-Seele-Straße 20
D-38122 Braunschweig
info@lived-non-food.de
www.lived-non-food.de
230 – 240 V ~ 50 Hz
3x AA 1,5V
approx. 64 g
approx. 60 g
1
5.2 cm x 6.3 cm x 9.0 cm
Danger! HigH risk for cHilDren anD otHer groups
of people!
Inappropriate handling may lead to injuries or material damage.
This product is not a toy and should not be handled by infants and small
children. Children cannot assess the dangers connected with electrical
devices. Do not leave the packaging material lying around. Children
might play with the plastic bags and risk suffocation.
Danger! Danger of electrical sHock!
This device should only be opened and/or repaired by an
expert or a person who is qualified to do so. Only original spare parts
may be used.
If you have any doubts on the function or further questions, please contact your
local dealer or our service center.
Warning! Misuse May cause risk of DaMage.
incorrect use of tHe Device May leaD to DaMages.
• Do not hang any objects on the product.
• The product must not be covered.
• The LEDs in this product cannot be exchanged.
• The LEDs in this product are not dimmable.
• Do not use this device in a tropical humid climate. If the product
is brought in from the cold to a warm area (e.g., during transport),
condensation can occur within the unit. Let the device reach room
temperature, before you use it.
• The product may not be subjected to extreme heat or cold. Do not
expose the product to intense sunlight, open fire or other heat sources:
Operating temperature: 0°C bis 40°C
Installation
Danger! DisregarDing can cause Material DaMage.
inappropriate placeMent can DaMage tHe proDuct
anD its coMponents.
Considering the large number of different types of varnishes and
polishes used for furniture, it is possible that the device will leave visible
residue on the furniture as a result of a chemical reaction. The product
should therefore not be placed on the surfaces of furniture without
suitable protection.
Warning!
Risk of eye injuries caused by high light intensity
LED-lamps are extremely bright. You must not, under any
circumstances, look directly into the emitted light as this may cause
permanent damage to your eyes. Never point the LED light directly
towards other people or animals.
Cable and plug
Danger! risk of DeatH by electric sHock, DaMageD
cable anD Mains plug!
The product is powered by electric current. Therefore please pay special
attention to the following when using the cable:
• Only a standard power socket (230 V~/50 Hz), connected to the public
mains system may be used as a power source.
• Never touch the plug with wet hands.
• If you want to take the plug out of the socket, always pull it directly at
the plug.
• For safety reasons always take the plug out of the socket in the event of
a thunderstorm.
• Take the plug out of the socket during installation and cleaning, and
when the product is not in use.
Functional description
Bright LED motion detector, flashlight and emergency lamp – all in one!
Put the device into a free socket and activate the motion detector. The
lamp detects automatically if it's dark outside and will lit. To use the
lamp as flashlight, just pull the device out of the socket and push the
button. The supply of energy will switch to three additional integrated
batteries. In case of a power failure, the device will switch to battery
power as well. The light will be activated for 30 seconds and will return
to previous mode afterwards.