Remote Control; Control Panel - ALPATEC VLP 3005 VSIT Mode D'emploi

All manuals and user guides at all-guides.com
notice_VLP3005_VSIT-reso
- Assemble the base (20) and the stand (4), fix them with the 4 screws and nuts (21).
- Fit the rear guard (13) on the motor shaft (10). Secure the guard to the motor body with the guard lock
nut (14).
- Put the fan blade (15) onto the motor shaft (10). Fix the fan blade with the spinner lock nut (16). The
spinner lock nut must be tightened by turning it in anti-clockwise direction. Check that the fan blade
rotates freely by turning with your hand.
- Unscrew the guard securing clip (18). Press the rim of the front guard (17) onto the rear guard (13).
Close the clip and tighten the screw.
(with remote control or control panel)
Note : insert battery type AAA in the remote control.

REMOTE CONTROL

C
A
2/01/06 14:43 Page 9
ASSEMBL Y OF THE APPLIANCE
ASSEMBL Y OF THE APPLIANCE
USING OF APPLIANCE USING OF APPLIANCE
D
E
B
C
A
9

CONTROL PANEL

D
E
B