Product Description; Standby Switch; Technical Specifications - Revab AXXION Mode D'emploi

Product description

Checking the wheelchair on delivery
Before you start using it, check that the
wheelchair delivered matches the product
description below. If you notice any damage
caused during transit, please inform your
dealer. Revab trusts that this wheelchair will
entirely meet your expectations.
Axxion
1. Battery with control panel
1.1. On/off switch
1.2. Battery indicator
1.3. Charger point
1.4. Button for battery indicator
2. Control box (not visible)
3. Push handle
3.1. Sensor

3.2. Standby switch

3.3. Indicator lamp
4. Wheel with drive motor
5. Battery charger with connecting lead
The wheelchair battery is fully charged on
delivery. The wheelchair is therefore ready for
use straight away. However, the capacity of the
battery may be lower to begin with because it
will have become partially discharged during
transportation.
GB 6
3
2
1
4
1.1 1.2
1.3
1.4
3.1 3.2 3.3
5

Technical specifications

The specification for the Axxion module is given
below. The other specifications for the wheelchair can
be found in the original user manual.
- Extra weight of the Axxion module: 23.5 kg
- Maximum speed: 6 km/h
- Battery type: NiMH, 24 V
- Battery capacity: 9000 mAh
- Charging time: a good 2 hours fully charged
- Range: 20 km*
- Charger input: 230 V
- Charger output: 24V DC/4 A
- Ambient temperature during use:
-5 - 40 °C
- Ambient temperature during charging:
+10 to +35°C
* The range may be less in practice depending on the weight of the
user, the weather, the surface, inclines, the age of the battery and
the extent to which the chair is pushed.
GB 7