STENLILLE Actio Mode D'emploi page 33

1. START
1.1 Charging
- Fully charge the smartwatch before first use
using the supplied USB cable.
- The end of the cable is provided with contact
points with magnets. For example, you can easily
connect the cable to the copper plates on the back
of the smartwatch.
- Fully charge the smartwatch every month if it
will not be used for a long time and turn it off
after it is fully charged.
- Only use the supplied power adapter of 5V and
0.5-1A.
1.2 Switching on
- After the device is fully charged, press and hold
button A (top right) for at least 5 seconds to turn
on the device.
- You can also switch off the appliance in the same
way.
33