Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
Key to symbols
Achtung
Caution
esenleger
Installation
Installation work
sch
Fliesenleger
Large and small format tiling work
stallation
Kontrolle
Check
htig
Notiz
Make a note of
Verweis anderes
Dokument
Cross reference to other
products or documentation
Optional
Optional
serplatte
Ersatzteil
Available as a replacement part
r
Richtig
Correct installation
hrmontage
Falsch
Incorrect installation
atzteil
QR-Code
QR code for further information
How to use the QR code:
1. Install a free QR code scanner on
your smartphone.
2. Use it to scan the QR code.
Area of application
– The installation Box Easy Connect is a mounting system that
ensures easy and safe installation for almost all our products
Safety information
– The safety, function and integrity of the product can only be
guaranteed if the information provided here is observed.
Failure to do so may result in injury or damage to persons
or property. The manufacturer is not liable for any damage
resulting from a failure to observe the instructions.
– It is essential that you follow the instructions given in the
installation guide in order to prevent installation errors and
damage to the product.
4
Important information –
Please note!
– Please observe the general safety and accident prevention
regulations in addition to the information provided in these
instructions.
About this guide
– This installation guide must be available for the entire
duration of the installation process. If the installation is to be
carried out by several individuals (e.g. fitter, tiler etc.), then the
installation guide must be passed on as appropriate.
– The dimensions are given in mm (millimetres).
– The illustrations are not true to scale.
– Subject to technical changes.
Installation information
– Only to be installed by qualified specialists.
– Handle the product with the greatest care in order to prevent
damage. Rings and other items that could damage the
product must be removed before installation.
– Please exercise care when handing sealing material.
– No defects may be left in the sealing material.
– The adhesion points must be clean, dry and free from grease.
– Customers need to provide the following for installation:
– Slurry-type seal coatings
– Assembly adhesives
– All large and small format tiling work must be carried out to
DIN 18157.
– When working on the screed, ensure that the substructure is
carefully laid and that the resulting load-bearing capacity is
adequate - this applies particularly in areas where the screed
is particularly narrow or strip-shaped due to the construction
situation.
– Also make sure that the Installation Box Easy Connect or
parts of it are not subjected to mechanical loads, e.g. from
the support system of the bath or shower area.
The G and H dimensions refer to the positioning of the drain
for the respective bathroom product - for Bette products,
please refer to the dimensional drawings in the price list or
the respective data sheets on the website.
Measure sheet
Verweis anderes
Dokument
Separate documents (e. g. for
mounting shower tray or bathtub)
should be complied with.
Publicité
Table des Matières
