Publicité
Les langues disponibles
Les langues disponibles
H-2540, H-2541
DOUBLE-SIDED GRID
BIKE RACK
TOOL NEEDED
9/16" Wrench
Leg x 2
Bolt x 8
1.
Insert bolt upward through last hole in leg and pole.
Fasten loosely with locknut. Repeat by attaching
other leg to pole. (See Inset A)
2. Insert bolt through hole at the top of the leg and
end of grid. (See Inset B)
NOTE: Grid can only be positioned one way
for mounting. The holes on top are drilled
diagonally through the tube at a slight
downward angle.
3. Fasten loosely with locknut. Repeat by
attaching other leg to grid.
4. Align bottom holes of grid with middle hole of legs.
Insert bolt upward and fasten loosely with locknut.
Repeat by attaching other leg to grid. (See Inset C)
5. Insert bolt upward through remaining hole in leg
and other pole. Fasten loosely with locknut. Repeat
by attaching other leg to pole. (See Inset D)
6. Complete assembly by tightening all bolts.
PAGE 1 OF 6
1-800-295-5510
uline.com
PARTS
Grid Section x 1
Locknut x 8
ASSEMBLY
Pour le français, consulter les pages 5-6.
Mounting Hardware
Pole x 2
Spike x 8
(Mounting Optional, See Page 2)
Inset A
Para Español, vea páginas 3-4.
Bracket x 4
Inset B
Inset D
Inset C
0721 IH-2540
Publicité
Table des Matières
Sommaire des Matières pour Uline H-2540
- Page 1 Para Español, vea páginas 3-4. Pour le français, consulter les pages 5-6. H-2540, H-2541 1-800-295-5510 uline.com DOUBLE-SIDED GRID BIKE RACK TOOL NEEDED 9/16" Wrench PARTS Mounting Hardware Leg x 2 Grid Section x 1 Pole x 2 Bracket x 4...
-
Page 2: Tools Needed
2½". (See Inset A) (See Inset B) 2. Blow out the dust in the hole. 5. Repeat on remaining spikes. 3. Place bracket over tubing. Inset B Inset A 2½" 1-800-295-5510 PAGE 2 OF 6 0721 IH-2540 uline.com... -
Page 3: Herramienta Necesaria
H-2540, H-2541 800-295-5510 uline.mx RACK PORTABICICLETAS DE REJILLA DE DOS LADOS HERRAMIENTA NECESARIA Llave de 9/16" PARTES Accesorios de Instalación 2 Patas 1 Sección de Rejilla 2 Poste 8 Estacas 4 Soportes (Instalación Opcional, Vea Página 4) 8 Pernos 8 Contratuerca ENSAMBLE Inserte un perno hacia arriba a través del orificio... -
Page 4: Instalación (Opcional)
6.4 cm (2½"). (Vea Figura A) 5. Repita en las estacas restantes. 2. Sople para eliminar el polvo del orificio. 3. Coloque el soporte sobre el tubo. Figura B Figura A 6.4 cm (2½") 800-295-5510 PAGE 4 OF 6 0721 IH-2540 uline.mx... -
Page 5: Support À Vélos De Type Grilleà Double Face
H-2540, H-2541 1-800-295-5510 uline.ca SUPPORT À VÉLOS DE TYPE GRILLE À DOUBLE FACE OUTIL REQUIS Clé de 9/16 po PIÈCES Matériel d'installation Patte x 2 Section de grille x 1 Poteau x 2 Support x 4 Piquet x 8 (Installation facultative, à la page 6) Écrou freiné x 8... -
Page 6: Outils Requis
5. Répétez la procédure pour les autres piquets. 2. Retirez la poussière du trou en soufflant dessus. 3. Placez le support sur le tube. Encadré B Encadré A 6,4 cm (2 ½ po) 1-800-295-5510 PAGE 6 OF 6 0721 IH-2540 uline.ca...