Ricatech RR110 Mode D'emploi page 5

UP for setting the alarm clock and snooze
In the alarm clock mode, press SET to set the alarm time，snooze time interval (1- 60 minutes) and the desired alarm melody. In the normal display mode,
press DOWN to switch between display of Celsius and Fahrenheit degrees.
Adjusting the normal time: From the normal time display mode, press SET to set the time. The setting sequence is hour, minute, year, month, date, exit.
Press UP and DOWN to adjust the time (each press changes the unit by one).
Setting the alarm clock and snooze time interval: From the normal time display mode, press MODE to select the alarm clock mode.
the LCD. Press SET to set the alarm clock and snooze timer. The setting sequence is hour, minute, snooze time interval (1-60 minutes), melody (oone of 8
different kinds). Use UP and DOWN to change the selected item. In order for both the alarm clock and snooze timer to operate,
displayed together on the LCD. When the alarm time is reached, the alarm will sound for 1 minute.
timer is active. The alarm will sound again when it reaches the snooze time interval. Press SET to cancel the snooze function and
stop flashing.
In the normal display mode, press DOWN to switch between Celsius and Fahrenheit degrees. The temperature display is updated once every minute.
AM/FM radio operation
Set the function selector on the back to "ON".
If the band selector is set to FM, pull out the telescopic antenna.
Turn the VOL knob to adjust the volume level.
Turn the tuning knob to select a desired radio station.
To turn off the radio, set the function selector on the back to OFF.
Timer playback with MP3, radio and alarm sound
All manuals and user guides at all-guides.com
timer on/off.
is displayed on
on the LCD will flash, indicating the snooze
on the LCD will
must be