Koenic KFH 3161W Mode D'emploi page 21

Place the product
Warning!
• Never locate the appliance directly below
a or near a socket outlet.
• Do not use the product in rooms smaller
than 4m .
2
• Ensure that there is a clearance of at
least 1 m in front of and 1m behind the
product.
• Never cover the air inlet or air outlet
grilles – Danger of overheating!
Fig. Place the product on a stable and even
1
surface.
Installation
Fig. Turn the temperature control knob to
2
the left (MIN).
Fig. Set the function control knob to the
3
OFF position.
Fig. Plug the power plug into an easily
4
accessible power outlet.
Heating
Function control knob
With the function control knob you can select
between 4 types of functions:
OFF : Turn off the product
: Fan function only (without heating)
: heating level I
: heating level II
Fig. Set the function control knob to a
5
desired heating function.
Note
The heating power is:
• 900 W for function
• 1800 W with function
IM_ KFH3161W_3161B_180516_V03_HR.indb 21
All manuals and user guides at all-guides.com
Temperature control knob
Fig. Turn the temperature control knob
6
clockwise to the desired temperature.
The operation indicator lights up as
soon as the product starts to heat.
The further you turn the temperature
control to the right, the higher the set
temperature.
Once the product has reached the
desired room temperature, turn the
temperature control knob back until the
product turns off. A click will be heard
when the thermostat shuts off. The
operating indicator goes out. The room
temperature is now kept constant at this
stage. The operation indicator turns on
when the product starts to heat again.
Fan (without heating)
Fig. Turn the temperature control knob to the
7
MAX position.
Fig. Set the function control knob to fan. The
8
fan starts and the operation indicator
lights on.
Overheat protection
If the product overheats, the product switches
off automatically. In this case, disconnect the
product from the power supply and let it cool
down completely.
English
21
16/5/18 5:03 pm