Bercomac Limitee 700374-1 Manuel Du Propriétaire page 17

PROBLEM
Snowblower digs into ground.
Snowblower does not raise evenly.
Snowblower vibrates or is
abnormally noisy.
TROUBLESHOOTING
POSSIBLE CAUSES
Ground is not frozen or too soft.
Tire pressure uneven from one side
to another.
Maladjustment of the snowblower.
Damaged pulley.
Damaged bearing.
Damaged fan.
Damaged auger.
15
CORRECTIVE ACTION
Adjust skid shoes lower so they
may better support the snowblower.
If problem persists, change skid
shoes for heavy duty skid shoes
(option #700243) which cover more
surface and prevents snowblower
from digging.
Verify and adjust tire pressure:
Front tires: 14 to 15 psi
Rear tires: 7 to 8 psi
Loosen male hitch on snowblower
(for identification, see parts list
"Snowblower").
Place a shim (ex.:piece of wood
approx. 2" thick) under the lowest
side of snowblower which needs to
be leveled. Re-tighten bolts.
Replace pulley.
Replace bearing.
Dismount & repair or replace fan.
Replace auger.