Perel Tools 7500-3B1 Mode D'emploi

7500-3B1– CORDLESS RECEIVER FOR REMOTE CONTROL 7500-3B
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling
service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the 7500-3B1. Read this manual carefully before
bringing the devices into service. If it was damaged in transit, don't install
or use it and contact your dealer.
2. Operation
• Control a number of receivers in each zone using a single transmitter.
• Assign one of the unit's 8 code settings to each device in order to avoid interference with neighbouring systems.
3. Specifications
Voltage
Installation
Rating
Channel Code
Remote Frequency
Remote Range
Code Setting
ON/OFF Indicator
The specifications and contents in this manual are subject to change without prior notice.
7500-3B1
250VAC / 50Hz
plug-in type
5A / 1000W max.
8 codes (1-4 / 5-8)
433.92MHz
>20m
rotary switch
LED
1
PEREL