Oransi mod jr Manuel D'utilisation page 13

6.
Install
Insert new HEPA filter with
rubber seal facing in and handle
facing out. Twist the handle
slightly to make sure filter is
fully seated in the housing.
7.
Reassemble
Place air purifier base back on
the housing. Line up arrow on
housing with the arrow of the
base (near the "Close"). Turn
the base of the air purifier
clockwise to tighten until the
arrow on the base is lined up
with the line near "Open".
8.
Lock
Move slide switch left to lock.
9.
Reset
Press and hold Filter Reset
button beneath the flashing
light for a few seconds.
Light will turn off when
filter counter is reset.
5
3
9
09
MAIN TEN ANCE