BizLine ST 500 Mode D'emploi page 9

Only use the mains cable module for BizLine power
tools! Do not attempt to operate other electrical
appliances with it!
Maintenance
All tools are contaminated by dust when working with
wood. Proper care is therefore essential. Always keep the
openings free of dust and dirt. The movable supporting
roller for the saw blade should be given a drop of oil from
time to time. Other than this, the jigsaw is virtually mainte-
nance-free. Before leaving the factory, all moving parts are
well lubricated.
Noise/vibration information
Measured values determined according to EN 60 745.
Typically the A-weighted noise levels of the machine are:
sound pressure level 85 dB (A); sound power level 96 dB
(A). Measurement uncertainty K = 3 dB.
Wear hearing protection!
The typically weighted acceleration is 6,6 m /s
Environmental protection
Do not dispose of electric tools together with
household waste material!
Recycle raw materials instead of disposing as
waste
The machine , accessori es and packaging s hould be sorted
for environmental-friendly recycli ng.
These instructions are printed on recycled paper manufac-
tured without chlorine.
The plastic components are labelled for categorised recyc-
ling.
Subject to change without notice.
All manuals and user guides at all-guides.com
.
2