V-TAC 80133970 Instructions De Montage page 8

A. DEVICE ADDING BY SCANNING THE CODE
• Tap on "device adding by scanning the code"(Ref Figure 9)
• Tap on the Checkbox.
• Tap on Connect to the Network
Now If your mobile phone is already connected to network wifi, it will show your
•
network wifi name. If not, press "Switch the network" to open your phone's WLAN
and connect to your available network. Then go back to the app. Input wifi password
(note: this password must be your network wifi password), and then click "Next". A
QR code will show on phone screen.
• Place the QR code towards the camera lens at a distance of around 10~20cm. After
the camera reads the QR, it will sound with two beeps and voice "Network is
connecting, please wait". Now on App, press "Beep or flashing lights". Then wait till
the camera confirms with "Wifi connection success" and finally "Camera is online".
On app it will also show "Addition is successful". Press "Start to experience".
FIGURE 10
FIGURE 11
ENGLISH
FIGURE 12