Hiti TE 60-AVR Mode D'emploi page 17

2. Fit the mixing paddle into the quick-release chuck.
3. Set the function selector switch to this symbol:
4. Press the power reduction (50 %) button.
◁ The product is ready for use.
5.3 Chisel positioning
CAUTION
Risk of injury! Loss of control over the chisel direction.
▶ Do not operate the tool when the selector switch is set to "Chisel
positioning". Turn the function selector switch until it engages in the
"Chiseling" position.
Note
The chisel can be adjusted to 24 different positions (in 15° increments).
This ensures that flat chisels and shaped chisels can always be set to
the optimum working position.
1. Set the function selector switch to this symbol:
2. Rotate the chisel to the desired position.
3. Set the function selector switch to this symbol:
◁ The product is ready for use.
5.3.1 Chiseling 10
▶ Set the function selector switch to this symbol:
5.3.2 Switch sustained operation on and off
Note
When chiseling, the control switch can be locked in the "on" position.
1. Push the lockbutton for continuous operation forward.
2. Press the control switch fully.
◁ The product then runs in sustained operating mode.
3. Push the lockbutton for continuous operation back.
◁ The product switches off.
6 Care and maintenance
WARNING
Danger of electric shock! Carrying out care and maintenance while the
supply cord is connected to the power outlet presents a risk of serious
injuries including burns.
▶ Always unplug the supply cord before carrying out all care and
maintenance tasks.
Printed: 28.06.2017 | Doc-Nr: PUB / 5277965 / 000 / 01
9
.
.
until it engages.
.
11
English 11