Hercules DJControl Inpulse 300 Mode D'emploi page 4

DJControl Inpulse 300
3. Follow lights to set the BPM with the tempo fader
▪
Press Play on deck 1.
▪
A red light alongside the tempo fader on
Deck 2 shows the direction to drag the
fader, to set Deck 2's track to the same
BPM.
▪
Move the Tempo Fader up or down, in the
direction of the red light.
DJUCED shows the same BPM on deck 1 and deck 2: TEMPO-MATCH
4. Follow lights to align the beats with the jog-wheel
▪
Press Play on deck 2.
▪
A red light below the jog wheel on deck 2
shows the direction to turn the wheel, to
align deck 2's beats with deck 1's beats.
▪
Turn the wheel in the direction of the red
light.
DJUCED waveforms show beat-grids for both tracks are aligned: BEAT-
MATCH
▪
If the direction of the red light changes,
move the fader slowly in the opposite
direction.
▪
When the red lights on the up/down
fader blink, stop moving the tempo fader.
▪
Both red lights off: the BPM is set.
▪
If the direction of the red light changes,
turn the wheel slowly in the opposite
direction.
▪
As soon as the red lights on the left and
right go off, stop: the beats are aligned.
4