Beper BP.601 Manuel D'instructions page 9

Blender Use instructions
PRODUCT DESCRIPTIONS Fig.1
1. Control knob
2. "Pulse" button
3. "Ice Crushing" button
4. "Blender" button
5. Lid
6. Plug
7. Jug
8. Blade unit
9. Non-slip feet
10. Motor body
OPERATION INSTRUCTIONS:
Place the jug on the base of the motor body.
Add the food, that has been thoroughly washed and cut into small pieces, into the jug.
Close it with the lid.
Plug it to a socket.
To start the appliance, turn the control knob to the desired speed according to the following indications (POSSI-
BLE SELECTIONS)
When the appliance is switched on, the "Pulse" button will start blinking in a red light.
As soon as the appliance has been terminated, turn off the appliance and unplug it. Clean the appliance accor-
ding to the instructions under the "CLEANING" section.
POSSIBLE SELECTIONS:
1) Turn the control knob to the right to select from MIN to MAX speed.
2) Turn the control knob to the left to the position
will start blinking in blue light.
PULSE = The unit operates at maximum speed.
ICE CRUSHING = Select this function to crush ice and the appliance will operate automatically for 40 se-
conds.
SMOOTH BLENDING = Blending at a lower speed than the above two functions. When this button is pres-
sed, the appliance will operate automatically for two minutes. If you want to interrupt the operation before
the set time, press the button again or turn the control knob to position "0".
CLEANING:
Always switch off the appliance by turning the control knob to position "0" and unplug the power cord from the
electric socket.
Clean the motor body with a damp cloth, do not immerse it in water or other liquids and do not wash it in the
dishwasher or under the running water tap.
Wash the jug and removable accessories with lukewarm water and detergents.
Pay great attention when washing the blades as they are very sharp.
Do not use scourers or abrasive pads on plastic or metal parts of the appliance.
Do not attempt to sharpen the blades.
Before storing the appliance, make sure it is completely dry.
SPECFICATIONS:
Power: 2000W
Power supply: 220-240V – 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
to start using the automatic settings. At this point the buttons
M
9
EN