1. Manuels
  2. Marques
  3. WETJET Manuels
  4. Équipement de nettoyage
  5. WJ85.403.003
  6. Manuel de l'utilisateur

WETJET WJ85.403.003 Manuel De L'utilisateur

Nettoyant de surface
Masquer les pouces
Table des Matières

Publicité

Liens rapides

Télécharger ce manuel
16"
Surface Cleaner
WJ85.403.003
User Manual
85.610.702

Publicité

Table des Matières
loading

Sommaire des Matières pour WETJET WJ85.403.003

  • Page 1 16" Surface Cleaner WJ85.403.003 User Manual 85.610.702...

  • Page 3: Table Des Matières

    TABLE OF CONTENTS Introduction Using the Operator’s Manual Product Identification Record Identification Numbers Operating Instructions Setup Operation Parts Parts Diagram Parts List Rotary Head Repair 10 Rotary Head Repair Parts Warranty 11 Warranty...

  • Page 4: Introduction

    This manual contains information for the complete range of WetJet Surface Cleaners, and is placed in order starting from the safety requirements to the operating functions of your pump.

  • Page 5: Product Identification

    PRODUCT IDENTIFICATION Record Identification Numbers 16" Surface Cleaner If you need to contact an Authorized Dealer or Customer Service line (1-866-850-6662) for information on servicing, always provide the product model and identification numbers. You will need to locate the model and serial number for the pump and record the information in the places provided below.

  • Page 6: Operating Instructions

    OPERATING INSTRUCTIONS Set-Up 1. Fit the lower portion of the handle into the mounting brackets on the cover and secure with the pins & clips. 2. Next, tighten the hose end into the gun mounted onto the upper portion of the handle. Use teflon tape on the hose ends. 3.
  • Page 7 OPERATING INSTRUCTIONS adjusted to maintain a minimum of 1" clearance between the spray tips and the surface being cleaned. While operating your surface cleaning system, please ensure that the nylon brush skirt remains in contact with the surface being cleaned. Do not operate on vertical or overhead surfaces.

  • Page 8: Parts Diagram

    PARTS DIAGRAM WJ85.403.003...

  • Page 9: Parts List

    PARTS LIST WJ85.403.003 PART # DESCRIPTION 85.792.003 Bracket, Mounting Head 16" 85.790.004 Rotary Head, 16" 85.792.004 Mounting Blocks 85.238.059 Hose, 62" x 3/8" 85.202.127 Easy Pull Gun 85.300.105 Plug, 3/8" MNPT 85.792.008K Handle 85.602.005 Hand Grip 85.792.010 Brush, 16" 85.792.009 Cover, Polypropylene 16"...

  • Page 10: Rotary Head Repair

    ROTARY HEAD REPAIR Rotary Head Repair Parts A repair kit for this Surface Cleaner’s rotary head, is available. If you encounter problems with the rotary head after the three months warranty has expired, this repair kit (part #85.790.010) allows you to replace the inner components very quickly.

  • Page 11: Warranty

    WARRANTY Warranty This surface cleaning unit has a three months limited warranty on all components except for the nylon brush ring. This includes the rotary head, spray gun, hose, the nylon brush ring, and plastic cover. This warranty covers manufacturer defects only and does not extend to any damage caused by the user.
  • Page 12 If you need assistance with the assembly or operation of your Surface Cleaner please call 1-866-850-6662...

Table des Matières