Wall-Mounted Installation - JVC SF-L100FG Manuel D'installation

Wall-mounted installation

SF-L100FG (Fixed Polarizing Screen) is necessary.
In some cases, use of the wall-mount fixtures requires specialized knowledge; therefore, it is recommended that the installation work be
entrusted to a professional.
Installing the screen on a concrete wall.
(1) Drill a hole
(2) Install the concrete anchor
(3) Attaching the wall-mount fixtures at the bottom of the screen
All manuals and user guides at all-guides.com
Drill a hole (diameter : 11mm depth : 30 mm) in a wall.
Be careful not to penetrate the wall when driving the
concrete anchors. A wall thickness of 40mm or more is
recommended
•
Insert the S-eM6 concrete anchor into the hole and use a driving
rod to drive it in until flush with the wall surface. The driving rod is
not included and must be purchased separately.
– 10 –
Fasten the S-w wall-mount fixtures w at the bottom of
the screen with eight S-r M6 hex head bolts.
Mount the S-q screen on the S-w wall-mount fixtures.
The screen itself is heavy, mass 20kg, so
it is recommended that the work be
performed by two persons.