Standby Mode; Using The Camera - Car and Driver CDC-900 Mode D'emploi

Cam into standby mode.
Note: Standby mode is explained below.
• When recording there will be a red counter
displayed in the bottom left side of the
screen. In addition, the user will also see the
LED indicator start flashing blue.
• When recording press the "Power" Button to
Lock the video. This will prevent the Dash
Cam from automatically recording over the
selected footage. Note: Pressing the "Power"
Button again will unlock the video.
• Standby mode is accessed via the recording
mode by pressing the "Ok" Button. When in
standby mode press the "Power" Button to
switch between, recording, camera,
playback, and settings. Press the "Ok" Button
to select and enter the settings or playback
modes.
• After pressing the "OK" Button to enter
standby mode from recording mode. Press
the "Power" Button once to enter camera
mode.
• When in camera mode press the "Ok"
Button to take photos.

Standby Mode

Using The Camera

5