Setup; Connection - Nyrius NSW500 Mode D'emploi

Power
PS3
Adapter
IN 1
Connecting your devices
1. Connect the HDMI cable from your display (monitor or TV) to the HDMI-OUT port on the back of
the NSW500.
2. Connect the input sources to the input ports on the back of the NSW500. You can connect 2 HDMI
sources to the HDMI inputs, 2 VGA sources to the VGA inputs and 2 analog sources to the
analog inputs.
3. Plug the power adaptor to an AC power outlet and the smaller end into the DC 5V input on the
back of the NSW500.
4. Turn on the power of the source device you are going to use.
5. Press the POWER button on the front panel of the NSW500. The POWER LED should be on.
6. Check the input indication LED on the front panel of the NSW500. Press the button corresponding
to the input source to select the input source. For example, if you have a device connnected
to the HDMI-IN "1" input, press the key with "1" in the HDMI section on the front panel of the
NSW500.
7. Use the "RESOLUTION" key to adjust the resolution.
8. Use the IR Remote control for more control features.
Blu-Ray player
IN 2
XBox 360™

CONNECTION

SETUP

Computer IPTV Box
VGA1 VGA2
AV2
- 4 -
Television
Output
AV1
Wii