CGV SSP 200 Mode D'emploi page 8

A). Keep a distance of the speaker up to 7 meters apart from transmitter, and then press "SCAN"
auto-tuning button for best tuning reception.
B) Whenever you find frequency jam, move your channel switch from one channel to the other
channel (there are three channels for selection) on the transmitter, and then press the "SCAN"
auto-tuning button again.
6. The BASS BOOST button can be used to enhance the bass
sound depending on your own music preferences. Turn
bass/boost effect ON simply by pressing the button down,
and pressing it once again to OFF.
Note
You should now be able to place the speakers freely from room to room without disruption. If
disruption should occur (signal breaks up), press the speaker's "SCAN" auto-tuning button to
maximize best reception.
If you hear interference from other components, switch the channel control of transmitter, and then
move the speakers to other free location. You can re-adjust the tuning control by moving it either
channel 1, 2 or 3 of the transmitter, then pressing "SCAN" auto-tuning button for best reception.
When transmitting / receiving over long distances, the signal from the system will become weaker.
Switching off
1. Turn the VOLUME ON/OFF knob until the click sound is heard to turn off the speaker and the
LED light goes off.
2. For protection of the transmitter and power saving, the transmitter will cut off automatically if
there is no/weak
In other words, if the signal comes back, the transmitter will work again automatically.
All manuals and user guides at all-guides.com
operation input signal
- 8 -
from audio source for 4 minutes.